IGX AT+FI Intelligraphics.com IGX AT+FI

UART based interface to support the AT Command set.

Extended AT command set for Wi-Fi configurations

Wireless Support for 802.11bg modes

Fully functional TCP/IP stack for networking support

[tabs slidertype=”top tabs”] [tabcontainer] [tabtext]Introduction [/tabtext] [tabtext]Technical
[/tabtext] [/tabcontainer] [tabcontent] [tab]

 

Product Description

 

The IGXVirtual Wi-Fi modem solution Command set reduces development time, cuts costs, saves board space, eases certification requirements, and minimizes the expertise required to get a Wi-Fi based product to market. Based on Texas Instrument’s SimpleLink™ CC3000, it requires no custom driver to write and has a lower CPU/memory footprint. The IGX Virtual Modem Command is your first choice when developing a wireless product that uses the “AT” Command Interface.

 
 
Features
 

Intelligraphics.com IGX AT+FI  Intelligraphics.com IGX AT+FI  Mapping extensions possible to default AT command set configuration

Intelligraphics.com IGX AT+FI  Intelligraphics.com IGX AT+FI  No operating system model using super loop architecture

Intelligraphics.com IGX AT+FI  Intelligraphics.com IGX AT+FI  Support for Application level communication using extended AT command set

 

[/tab] [tab]

Technical Details

  • Support for standard network applications support:
    1. IPCONFIG (STATIC and DHCP)
    2. PING
    3. ARP
  • Security support for:
    1. WEP
    2. TKIP
    3. WPA
  • Virtual Modem Data rate support for:
    1. WEP
    2. TKIP

[/tab] [/tabcontent] [/tabs]

Leave a Reply